To pave the way for thermophysical modeling and further PBF-LB/M process optimization, the thermophysical properties of Ti-6Al-4V in powder and processed states were investigated using thermo-mechanical analysis, laser flash analysis, and differential scanning calorimetry. Microstructural characterization using SEM, Vickers hardness testing, and XRD facilitated a novel interpretation of the results. The macroscopic density exhibited a linear relationship up to 880 , showing only a minor impact from microstructural effects. The evolution of martensitic microstructure was analyzed by examining linear thermal expansion coefficients indicating direction dependency. During heating, the precipitation and stabilization of β provoke the formation and decomposition of the intermetallic phase, accompanied by a significant increase in hardness and an exothermic event. Additionally, the relaxation of residual stresses and transformation into the β phase determines the microstructural evolution. Thermal diffusivity of as-built Ti-6Al-4V propagates linearly up to 950 . For powder, HotDisk measurements corroborate laser flash data obtained up to 850 . Based on the LFA, the start of sintering is identified and attributed to a change in the heat transfer mechanism in AM powders. Specific heat capacity and effective thermal conductivity of AM Ti-6Al-4V are determined, highlighting the shortcomings of predicting AM powders' conductivity based on solid materials.     «

To pave the way for thermophysical modeling and further PBF-LB/M process optimization, the thermophysical properties of Ti-6Al-4V in powder and processed states were investigated using thermo-mechanical analysis, laser flash analysis, and differential scanning calorimetry. Microstructural characterization using SEM, Vickers hardness testing, and XRD facilitated a novel interpretation of the results. The macroscopic density exhibited a linear relationship up to 880 , showing only a minor impact...     »