A 162 GHz power amplifier with 14 dBm output power
Titel Konferenzpublikation:
2016 IEEE Bipolar/BiCMOS Circuits and Technology Meeting (BCTM)
Konferenztitel:
IEEE Bipolar/BiCMOS Circuits and Technology Meeting (2016, New Brunswick, NJ)
Tagungsort:
New Brunswick, NJ, USA
Jahr der Konferenz:
2016
Datum Beginn der Konferenz:
25.09.2016
Datum Ende der Konferenz:
27.09.2016
Verlegende Institution:
IEEE
Jahr:
2016
Seiten von - bis:
174-177
Sprache:
Englisch
Abstract:
A 3-stage power amplifier (PA) with 14dBm saturated output power (Psat), 29.5 dB small-signal gain, and 4.8% power-added efficiency (PAE) at a frequency of 162GHz is presented. From 155 to 165 GHz, Psat remains higher than 12.5 dBm, while the small-signal gain varies from 35.4 dB to 28.3 dB. Maximum output power and gain performance are obtained by using a differential cascode topology and operating the transistors well beyond their open-base collector-emitter breakdown voltage (BVCEO), and by optimum matching of the three stages of the PA. To our best knowledge, this is the highest reported output power for a sillicon-based PA beyond 150 GHz. The chip is fabricated in a 130nm SiGe BiCMOS technology with fT/fmax = 250/370 GHz. «
A 3-stage power amplifier (PA) with 14dBm saturated output power (Psat), 29.5 dB small-signal gain, and 4.8% power-added efficiency (PAE) at a frequency of 162GHz is presented. From 155 to 165 GHz, Psat remains higher than 12.5 dBm, while the small-signal gain varies from 35.4 dB to 28.3 dB. Maximum output power and gain performance are obtained by using a differential cascode topology and operating the transistors well beyond their open-base collector-emitter breakdown voltage (BVCEO), and by o... »