Characterizing the transition process of airfoils can be very challenging and requires often extensive measurement methods. Frequently at low Reynolds numbers the suction side separation often occurs close to the trailing edge so that asserting reattachment of the flow to form a closed separation bubble from the profile pressure distributions becomes uncertain. In the current work the suction side transition process is investigated more precisely with a convenient method to determine the dynamic pressure close to the suction surface using a Preston probe (flattened Pitot tube). Therefore four low pressure turbine airfoils, which show different characteristics of the transition process in the static pressure distribution have been investigated at the High-Speed Cascade Wind Tunnel at the Universit¨at der Bundeswehr M¨unchen at constant Mach number and under a wide range of Reynolds numbers (40 000 to 400 000). It is shown that this method is appropriate to determine transition start and end as well as the separation and reattachment point of a separated flow as long as the probe height is small enough compared to the boundary layer thickness. The measurement results are compared to profile pressure distributions and hot-wire boundary layer profiles. Also the influence of periodic unsteady inflow conditions on the dynamic pressure near the wall is revealed in the time average. Limitations due to the probe geometry are discussed and a method to estimate the influence of the probe geometry on the measured dynamic pressure coefficient is suggested.    «

Characterizing the transition process of airfoils can be very challenging and requires often extensive measurement methods. Frequently at low Reynolds numbers the suction side separation often occurs close to the trailing edge so that asserting reattachment of the flow to form a closed separation bubble from the profile pressure distributions becomes uncertain. In the current work the suction side transition process is investigated more precisely with a convenient method to determi...    »