In the laser powder bed fusion processes for metal additive manufacturing, a support structure is needed to fix the part to the base plate and to support overhanging regions. Currently the importance of support structure for a successful build process is often underestimated and some effects are not yet well understood. Therefore, this study investigates the fracture behavior and mechanical properties of thin additive manufactured struts using the titanium alloy Ti-6Al-4V and specific machine parameters for support structures. Tensile tests were performed for different strut diameters and the fracture surfaces were analyzed using a laser microscope and a scanning electron microscope. Additionally, the porosity was examined with micro-CT scans. The results were compared with a different set of parameters used for solid parts. The experiments revealed that struts produced with support parameters had no significantly lower tensile strength than the comparative parts. Despite that, some porosity and around two percent of defects on the fracture surface for parts using the solid parameter set have been found. Parts with support parameters show no porosity, even though the energy density is around 30% lower compared to the solid parameter set.     «

In the laser powder bed fusion processes for metal additive manufacturing, a support structure is needed to fix the part to the base plate and to support overhanging regions. Currently the importance of support structure for a successful build process is often underestimated and some effects are not yet well understood. Therefore, this study investigates the fracture behavior and mechanical properties of thin additive manufactured struts using the titanium alloy Ti-6Al-4V and specific machine pa...    »